Feature:

1.This product is in cycle switch mode,and the induction lamp flashes for 3 times to enter the human body induction mode;induction mode needs to be in low brightness environment to trigger the start.
2.The charging voltage is DC5V,which can connected to the computer or mobile power by USB cable.When charging,the red light is on,and when full,the green is on.
3.The bottom of the product is attached with a magnet,which can be directly adsorbed on the iron object,or can be used to stick the iron sheet.
4.Multifunctional application, which can be used for reading lamp, finding objects, trunk lamp, auxiliary lighting, etc.

Notes:

1.Please fully charge the product before using it for the first time.
2.Do not use this product when charging.
3.Please Keep the product away from fire or explosive.

Product list:

1.LED induction light*1

2.USB charging cable**1

3.Square iron sheet*2

Function Description：

Button:

• Initially in the off state;

• Press once to enter the constant light mode (in constant light mode, the sensing function is not active, and the light will not automatically turn off);

• Press a second time to enter the night sensing mode (the light will flash 3 times as a prompt, then enter the night sensing mode);

• Press a third time to enter the all-day sensing mode (the light will flash 2 times as a prompt, then enter the all-day sensing mode);

• Press a fourth time to return to the off state, and so on in a cycle;

Quick double press the button: When the light is on, you can cycle through different light colors (with color memory function);

• Long press: When the light is on, hold the button to adjust the brightness, release the button to lock the brightness (with brightness memory function);

【Special Instructions for Human Body Sensing Mode】

1. Set【Night】Sensing Mode: Under sufficient light conditions, the light will not turn on even if it senses a person. It will only turn on automatically when the light is insufficient and a person is detected;

2. Set【All-Day】Sensing Mode: Regardless of whether the light is sufficient, the light will turn on automatically when it senses a person;

3. After entering and leaving the sensing area, the light will automatically turn off after about 25 seconds;

4. If a person remains active within the sensing area, the light will stay on. (Smart sensing, energy-saving and convenient)